| 1. Disconnect the battery from weight. |
| Generator of Bosch
|
|
2. Remove the regulator and check length of brushes which has to be not less than 6 mm. |
| 3. If necessary replace brushes which fasten the screw or the soldering (to solder no more than 5 sec.). |
| Generator of Motorola |
| 4. Remove the generator. |
| 5. Unscrew screws and remove the regulator and the brush holder. |
| 6. Check length of brushes which has to be not less than 6 mm. Brushes change in a set. |
