BMW 3 Series E30

since 1983-1994 release

Repair and operation of the car

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engine
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmissions
+ 9. Coupling
+ 10. Brake system
+ 11. Running gear
- 12. Body
   12.2. Vinyl finishing
   12.3. Repair of insignificant damages of a body
   12.4. Repair of considerable damages of a body
   12.5. Loops and locks
   12.6. Windshield and motionless glasses
   12.7. Forward lattice
   12.8. Cowl
   12.9. Bumpers
   12:10. Internal panel of a door
   12:11. Door
   12:12. Cover luggage carrier / cover of a back compartment
   12:13. Door lock, drum switch of the lock and door handles
   12:14. Door glass
   12:15. Window regulator
   12:16. External mirror
   12:17. Casing of a steering column
   12:18. Seats
   12:19. Check of seat belts
+ 13. Electric equipment
+ 14. Useful tips


12:14. Door glass

Removal, installation

1. Disconnect the battery from weight.
2. Remove the internal panel of a door and the water filter.
3. Hook and remove internal and external a door sealant.
Glass of a forward door
4. Raise a window so that to provide access to fastening bolts through apertures in a door framework (if the door is equipped with the power window, then connect the battery to weight, include a window regulator and again disconnect weight).
5. Record glass, turn off fastening bolts to a window regulator.
6. Lift glass, incline and get from a door.
7. Installation is carried out upside-down.
Glass of a back door
8. Perform the operations which are listed above in points 1-5.
9. Bring glass out of gearing from a forward guide, squeeze out rubber guides.
10. Unscrew screws, take the handle aside.
11. Turn off bolts of a back framework of glass, push a framework into a door and remove glass.
12. Installation is carried out upside-down.