BMW 3 Series E30

since 1983-1994 release

Repair and operation of the car



BMW E30
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engine
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmissions
- 9. Coupling
   9.2. Specifications
   9.3. Coupling check
   9.4. Main cylinder of coupling
   9.5. Coupling pedal
   9.6. The blocking coupling switch
   9.7. Working cylinder of coupling
   9.8. Removal of air from a coupling hydraulic actuator
   9.9. Coupling details
   9.10. Driveshaft
   9.11. Elastic coupling
   9.12. Average support
   9.13. Cardan hinges
   9.14. The forward aligning plug
   9.15. Driveshaft CV JOINT
   9.16. Half shafts
   9.17. CV JOINTS and covers
   9.18. Epiploons of a reducer of a back axis
   9.19. Reducer of a back axis
   9.20. Epiploon of the leading gear wheel of a reducer
+ 10. Brake system
+ 11. Running gear
+ 12. Body
+ 13. Electric equipment
+ 14. Useful tips


621199f4



9.18. Epiploons of a reducer of a back axis

Removal and installation

PERFORMANCE ORDER
1. Lift the car, merge oil from a reducer, get from a reducer of a half shaft and take aside.
2. Hook mount and get a flange from a reducer.
3. Remove a lock ring.
4. Check a condition of a flange of a half shaft. At formation of a flute from an epiploon replace a flange.
5. Remove an epiploon, having hooked the screw-driver.
6. Grease and press a new epiploon. Replace a lock ring, insert a flange before gearing with a lock ring. Further assembly is carried out upside-down.