BMW 3 Series E30

since 1983-1994 release

Repair and operation of the car



BMW E30
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engine
+ 4. Cooling system
+ 5. Heating and ventilation
- 6. Fuel system
   6.2. Specifications
   6.3. Check of system of injection
   6.4. Air stream measuring instrument
   6.5. Throttle branch pipe
   6.6. Fuel pressure regulator
   6.7. Nozzle of launch of the cold engine and thermotimer
   6.8. Check and replacement of nozzles
   6.9. Air proofreader of idling
   6.10. Order of a decompression of fuel system
   6.11. Check of pressure of fuel
   6.12. The fuel pump, the pump of pumping and the fuel level sensor in a tank
   6.13. Fuel pipes and union
   6.14. Fuel tank
   6.15. Air filter
   6.16. Cable of the drive of a butterfly valve
   6.17. Carburetor
+ 7. Exhaust system
+ 8. Transmissions
+ 9. Coupling
+ 10. Brake system
+ 11. Running gear
+ 12. Body
+ 13. Electric equipment
+ 14. Useful tips


621199f4



6.13. Fuel pipes and union

GENERAL INFORMATION

Tubes of fuel pipes fasten to a body brackets with screws. As a rule the leak develops from connecting pieces of hoses therefore they should be checked periodically.

At a contamination of tubes check a condition of the filter of the pump. Remove tubes, having executed a decompression, and blow.

New tubes and hoses have to correspond in accuracy to replaced. On the considered cars the steel welded tubes meeting technical requirements of the manufacturer are applied (copper and aluminum tubes because of bad vibrostability are forbidden to be established).